Caterpillar Mini Excavator (Compact Excavator) 302.7D CR

Sold By: RocksFair

In stock

The Cat 302.7D CR Mini Hydraulic Excavator delivers power and performance in a compact size to help you work in a wide range of applications.

 

  • Net Power- 15.2 kW
  • Operating Weight- 2830 kg
  • Maximum Digging Height- 4170 mm / 4300 mm
Compare

Caterpillar machinery construction agircultre building lifting work tool equipment

COMPACT RADIUS

CONFIGURED WITHOUT THE ADDITIONAL COUNTERWEIGHT THE 302.7D CR IS A TRUE ZERO TAIL SWING MACHINE WITH THE UPPER BODY STAYING WITHIN THE WIDTH OF THE UNDERCARRIAGE DURING ROTATION. THIS ENABLES THE OPERATOR TO WORK WITHIN CONFINED AREAS AND CONCENTRATE ON THE WORK BEING PERFORMED WITHOUT HAVING TO WORRY ABOUT THE BACK OF THE MACHINE.

TRANSPORT WEIGHT

THE 302.7D CR IS DESIGNED WITH A TRANSPORT WEIGHT BELOW 2.7 TONNES (6,000 LB) WITH CAB FITTED. THIS ALLOWS LOWER TRAILER TRANSPORTATION COSTS USING A STANDARD PASSENGER VEHICLE (SUBJECT TO NATIONAL RESTRICTIONS).

ADDITIONAL COUNTERWEIGHT

AN OPTIONAL ADDITIONAL WEIGHT INCREASES THE MACHINES LIFTING CAPABILITY WITH ONLY A SMALL ADDITION TO THE OVERHANG. AN OPTIONAL ADDITIONAL COUNTERWEIGHT INCREASES THE MACHINES LIFTING CAPACITY WITH ONLY A SMALL ADDITION TO THE OVERHANG. (THIS COUNTERWEIGHT IS FITTED AS STANDARD FOR NORTH AMERICA AND AUSTRALIA)

AUXILIARY HYDRAULICS AS STANDARD FIT

MACHINE IS ‘READY TO WORK.’ HAMMER AND TWO WAY LINES COMPLETE WITH QUICK DISCONNECT FITTINGS ARE STANDARD. CONNECTIONS ARE LOCATED CLOSE TO THE TOOL TO REDUCE HOSE LENGTHS AND ANY POTENTIAL DAMAGE. ADDITIONAL LINES OPTIONS ARE AVAILABLE TO FURTHER INCREASE MACHINE VERSATILITY. STICK AND BUCKET CYLINDER HOSES ARE PROTECTED BY ROUTING THEM THROUGH THE BOOM.

100% PILOT CONTROLS

DELIVERS EXCELLENT MACHINE CONTROL AND LIFETIME ‘AS NEW’ PERFORMANCE ELIMINATING THE NEED FOR LINKAGE AND CABLE MAINTENANCE.

AUTOMATIC SWING LOCK

SAFE TRANSPORTATION OF THE MACHINE IS AIDED BY THE CAT AUTOMATIC SWING LOCK WHICH LOCKS THE MACHINES UPPER BODY IN PLACE WHEN THE CONTROL CONSOLE IS RAISED OR THE ENGINE IS STOPPED.

THUMB READY STICK (NORTH AMERICAN BUILDS)

MACHINE IS CONFIGURED WITH BRACKETS AND RELIEF VALVES FOR SIMPLE AND COST EFFECTIVE MOUNTING OF A HYDRAULIC THUMB.

DOZER FLOAT

GROUND LEVELLING AND FINISHING APPLICATIONS ARE FAST AND EASIER WITH THE DOZER FLOAT FUNCTION ENGAGED MAKING SITE CLEAN-UP MUCH MORE EFFICIENT.

CAB COMFORT

THE CAT® 302.7D CR GIVES THE OPERATOR A LARGE COMFORTABLE SPACE IN WHICH TO WORK. THE ERGONOMIC CONTROL LAYOUT, TRAVEL PEDALS AND ADJUSTABLE WRIST RESTS ARE ENGINEERED TO MINIMIZE OPERATOR FATIGUE AND INCREASE PRODUCTIVITY.

SIMULTANEOUS OPERATION

BOTH MACHINE UPPER BODY SWING AND BOOM OFFSET CAN BE CONTROLLED SIMULTANEOUSLY FOR FASTER MACHINE POSITIONING AND OBJECT HANDLING.

ADJUSTABLE FLOW CONTROL

MACHINES CONFIGURED WITH PROPORTIONAL AUXILIARY HYDRAULICS INCLUDE ADJUSTABLE HYDRAULIC FLOW CONTROL FOR EVEN GREATER TOOL CONTROL. ESPECIALLY USEFUL WITH TOOLS SUCH AS ANGLING BUCKETS.

SPLIT FRONT WINDOW

THE LOWER FRONT WINDOW SECTION SLIDES INTO THE UPPER SECTION FRAME. BOTH SECTIONS ARE THEN RAISED AND STORED IN THE ROOF USING A GAS ASSISTED MECHANISM. THIS ALLOWS THE OPERATOR TO POSITION THE FRONT WINDOW TO SUIT THEIR VISIBILITY AND VENTILATION REQUIREMENTS WITH EASY STORAGE.

PIVOT BUSHING

STEEL BUSHINGS ARE FITTED ON ALL FRONT LINKAGE PIVOT POINTS INCLUDING THE SWING CASTING, BOOM, STICK AND BUCKET. DESIGNED FOR LONG LIFE AND EASY REPLACEMENT.

MAINTENANCE ACCESS

REMOVABLE COVERS IN THE CAB AND AT THE REAR OF THE MACHINE PROVIDE EASY ACCESS TO HYDRAULIC SYSTEM COMPONENTS.

SIDE MOUNTED ENGINE

ALL DAILY SERVICE POINTS ARE EASILY ACCESSED THROUGH THE LARGE SIDE COVER. THE ENGINE POSITION ALSO REDUCES HEAT AND NOISE TRANSFER INTO THE OPERATOR STATION (CAB).

CUSTOMER SUPPORT

PRODUCT SUPPORTED THROUGH THE CAT DEALER AND WORLDWIDE PARTS NETWORK AIMED AT MINIMIZING DOWNTIME.

– FINANCE OPTIONS

– WARRANTY OPTIONS

– MAINTENANCE CONTRACTS

HELP AND ADVICE IN PRODUCT AND OPTION SELECTION TO MAXIMIZE EFFICIENCY AND OPERATING PROFITABILITY

WORK TOOLS

A RANGE OF TOOLS IS AVAILABLE TO TAKE ADVANTAGE OF THE MACHINES VERSATILITY. ALL TOOLS ARE MATCHED TO THE MACHINE TO OPTIMIZE PERFORMANCE AND DELIVER EXCELLENT VALUE THROUGH HIGH PRODUCTIVITY AND LONG LIFE.

Additional information

Net Power

15.2 kW

Engine Model

Yanmar 3TNV76

Gross Power

17.9 kW

Emissions

Meets U.S. EPA Tier 4 Final/EU Stage V emission standards.

Displacement

1115 cm³

Operating Weight

2830 kg

Operating Weight Canopy

2737 kg

Maximum Digging Height

4170 mm, 4300 mm (Long Stike)

Tail Swing Radius

760 mm

Boom Swing - Left

75 °

Height

Transport Length

4255 mm (Arm Lowered)

Maximum Dozer Digging Depth

419 mm

Length - Undercarriage

2006 mm

Track Width

764 mm

Front Linkage Swing Radius

533 mm

Width

Maximum Dozer Lift Height

380 mm

Maximum Reach - Ground Level

4481 mm, 4681 mm (Long Stike)

Boom Swing - Right

50 °

Maximum Vertical Dig Depth

1962 mm, 2152 mm (Long Stike)

Maximum Digging Reach

4613 mm, 4805 mm (Long Stike)

Maximum Loading Height

2840 mm, 2970 mm (Long Stike)

Gradeability

30°/58%

Speed

,

Operating Pressure

225 bar

Operating Pressure-Swing

206 bar

Digging Force - Stick

13.6 kN (Long Stick), 15.4 kN

Auxiliary Flow

30.8 L/min (Secondary), 52.2 L/min (Primary)

Main Hydraulic Pump Flow

89.4 l/min

Digging Force - Bucket

22.5 kN

Blade Width

1570 mm

Blade Height

290 mm

Maximum Digging Depth

2544/2744 mm (8 ft 4 in/9 ft 0 in)

Maximum Blade Height

380 mm

Fuel Tank

35.2 l

Hydraulic Tank

26.5 l

Vendor Information

  • Store Name: RocksFair
  • Vendor: RocksFair
  • Address:
  • No ratings found yet!

Menu

Caterpillar Mini Excavator (Compact Excavator) 302.7D CR